Apparent viscosity

Apparent viscosity (sometimes denoted η) is the shear stress applied to a fluid divided by the shear rate ( η = τ γ ˙ {displaystyle eta ={frac { au }{dot {gamma }}}} ). For a Newtonian fluid, the apparent viscosity is constant, and equal to the Newtonian viscosity of the fluid, but for non-Newtonian fluids, the apparent viscosity depends on the shear rate. Apparent viscosity has the SI derived unit Pa·s (Pascal-second, but the centipoise is frequently used in practice: (1 mPa·s = 1 cP). Apparent viscosity (sometimes denoted η) is the shear stress applied to a fluid divided by the shear rate ( η = τ γ ˙ {displaystyle eta ={frac { au }{dot {gamma }}}} ). For a Newtonian fluid, the apparent viscosity is constant, and equal to the Newtonian viscosity of the fluid, but for non-Newtonian fluids, the apparent viscosity depends on the shear rate. Apparent viscosity has the SI derived unit Pa·s (Pascal-second, but the centipoise is frequently used in practice: (1 mPa·s = 1 cP). A single viscosity measurement at a constant speed in a typical viscometer is a measurement of the apparent viscosity of a fluid. In the case of non-Newtonian fluids, measurement of apparent viscosity without knowledge of the shear rate is of limited value: the measurement cannot be compared to other measurements if the speed and geometry of the two instruments is not identical. An apparent viscosity that is reported without the shear rate or information about the instrument and settings (e.g. speed and spindle type for a rotational viscometer) is meaningless.