Biofouling

Biofouling or biological fouling is the accumulation of microorganisms, plants, algae, or animals on wetted surfaces. Such accumulation is referred to as epibiosis when the host surface is another organism and the relationship is not parasitic. Antifouling is the ability of specifically designed materials and coatings to remove or prevent biofouling by any number of organisms on wetted surfaces. Since biofouling can occur almost anywhere water is present, biofouling poses risks to a wide variety of objects such as medical devices and membranes, as well as to entire industries, such as paper manufacturing, food processing, underwater construction, and desalination plants. Specifically, the buildup of biofouling on marine vessels poses a significant problem. In some instances, the hull structure and propulsion systems can be damaged. The accumulation of biofoulers on hulls can increase both the hydrodynamic volume of a vessel and the hydrodynamic friction, leading to increased drag of up to 60%. The drag increase has been seen to decrease speeds by up to 10%, which can require up to a 40% increase in fuel to compensate. With fuel typically comprising up to half of marine transport costs, antifouling methods are estimated to save the shipping industry around $60 billion per year. Increased fuel use due to biofouling contributes to adverse environmental effects and is predicted to increase emissions of carbon dioxide and sulfur dioxide between 38 and 72% by 2020. A variety of antifouling methods have historically been implemented to combat biofouling. Recently, scientists have begun researching antifouling methods inspired by living organisms. This type of design imitation is known as biomimicry. The variety among biofouling organisms is highly diverse, and extends far beyond the attachment of barnacles and seaweeds. According to some estimates, over 1,700 species comprising over 4,000 organisms are responsible for biofouling. Biofouling is divided into microfouling — biofilm formation and bacterial adhesion — and macrofouling — attachment of larger organisms. Due to the distinct chemistry and biology that determine what prevents them from settling, organisms are also classified as hard- or soft-fouling types. Calcareous (hard) fouling organisms include barnacles, encrusting bryozoans, mollusks, polychaete and other tube worms, and zebra mussels. Examples of non-calcareous (soft) fouling organisms are seaweed, hydroids, algae and biofilm 'slime'. Together, these organisms form a fouling community. Marine fouling is typically described as following four stages of ecosystem development. The chemistry of biofilm formation describes the initial steps prior to colonization. Within the first minute the van der Waals interaction causes the submerged surface to be covered with a conditioning film of organic polymers. In the next 24 hours, this layer allows the process of bacterial adhesion to occur, with both diatoms and bacteria (e.g. vibrio alginolyticus, pseudomonas putrefaciens) attaching, initiating the formation of a biofilm. By the end of the first week, the rich nutrients and ease of attachment into the biofilm allow secondary colonizers of spores of macroalgae (e.g. enteromorpha intestinalis, ulothrix) and protozoans (e.g. vorticella, Zoothamnium sp.) to attach themselves. Within 2 to 3 weeks, the tertiary colonizers- the macrofoulers- have attached. These include tunicates, mollusks and sessile Cnidarians. Governments and industry spend more than US$5.7 billion annually to prevent and control marine biofouling.Biofouling occurs everywhere but is most significant economically to the shipping industries, since fouling on a ship's hull significantly increases drag, reducing the overall hydrodynamic performance of the vessel, and increases the fuel consumption. Biofouling is also found in almost all circumstances where water-based liquids are in contact with other materials. Industrially important impacts are on the maintenance of mariculture, membrane systems (e.g., membrane bioreactors and reverse osmosis spiral wound membranes) and cooling water cycles of large industrial equipment and power stations. Biofouling can occur in oil pipelines carrying oils with entrained water, especially those carrying used oils, cutting oils, oils rendered water-soluble through emulsification, and hydraulic oils.