Degree of curvature

Degree of curve or degree of curvature is a measure of curvature of a circular arc used in civil engineering for its easy use in layout surveying. Degree of curve or degree of curvature is a measure of curvature of a circular arc used in civil engineering for its easy use in layout surveying. The degree of curvature is defined as the central angle to the ends of an arc or chord of agreed length. Various lengths are commonly used in different areas of practice. This angle is also the change in forward direction as that portion of the curve is traveled. Curvature is usually measured in radius of curvature. A small circle can be easily laid out by just using radius of curvature, But if the radius is large as a km or a mile, degree of curvature is more convenient for calculating and laying out the curve of large scale works like roads and railroads. By this method curve setting can be easily done with the help of a transit or theodolite and a chain, tape or rope of a prescribed length. In an n-degree curve, the forward bearing changes by n degrees over the standard length of arc or chord. The usual distance in North American road work is 100 feet (30.48 m) of arc. North American railroad work traditionally used 100 feet of chord and this may be used in other places for road work. Other lengths may be used—such as 30 metres or 100 metres where SI is favoured, or a shorter length for sharper curves. Where degree of curvature is based on 100 units of arc length, the conversion between degree of curvature and radius is Dr = 18000/π ≈ 5729.57795, where D is degree and r is radius.