Process engineering

Process engineering is the understanding and application of the fundamental principles and laws of nature that allow us to transform raw material and energy into products that are useful to society, at an industrial level. By taking advantage of the driving forces of nature such as pressure, temperature and concentration gradients, as well as the law of conservation of mass, process engineers can develop methods to synthesize and purify large quantities of desired chemical products. Process engineering focuses on the design, operation, control, optimization and intensification of chemical, physical, and biological processes. Process engineering encompasses a vast range of industries, such as agriculture, automotive, biotechnical, chemical, food, material development, mining, nuclear, petrochemical, pharmaceutical, and software development. The application of systematic computer-based methods to process engineering is 'process systems engineering'. Process engineering is the understanding and application of the fundamental principles and laws of nature that allow us to transform raw material and energy into products that are useful to society, at an industrial level. By taking advantage of the driving forces of nature such as pressure, temperature and concentration gradients, as well as the law of conservation of mass, process engineers can develop methods to synthesize and purify large quantities of desired chemical products. Process engineering focuses on the design, operation, control, optimization and intensification of chemical, physical, and biological processes. Process engineering encompasses a vast range of industries, such as agriculture, automotive, biotechnical, chemical, food, material development, mining, nuclear, petrochemical, pharmaceutical, and software development. The application of systematic computer-based methods to process engineering is 'process systems engineering'. Process engineering involves the utilization of multiple tools and methods. Depending on the exact nature of the system, processes need to be simulated and modeled using mathematics and computer science. Processes where phase change and phase equilibria are relevant require analysis using the principles and laws of thermodynamics to quantify changes in energy and efficiency. In contrast, processes that focus on the flow of material and energy as they approach equilibria are best analyzed using the disciplines of fluid mechanics and transport phenomena. Disciplines within the field of mechanics need to be applied in the presence of fluids or porous and dispersed media. Materials engineering principles also need to be applied, when relevant. Regardless of the exact tools required, process engineering often requires the use of a process flow diagram (PFD) where material flow paths, storage equipment (such as tanks and silos), transformations (such as distillation columns, receiver/head tanks, mixing, separations, pumping, etc.) and flowrates are specified, as well as a list of all pipes and conveyors and their contents, material properties such as density, viscosity, particle-size distribution, flowrates, pressures, temperatures, and materials of construction for the piping and unit operations. The process flow diagram is then used to develop a piping and instrumentation diagram (P&ID) which graphically displays the actual process occurring. P&ID are meant to be more complex and specific than a PFD. The P&ID is then used as a basis of design for developing the 'system operation guide' or 'functional design specification' which outlines the operation of the process. From the P&ID, a proposed layout (general arrangement) of the process can be shown from an overhead view (plot plan) and a side view (elevation), and other engineering disciplines are involved such as civil engineers for site work (earth moving), foundation design, concrete slab design work, structural steel to support the equipment, etc.). All previous work is directed toward defining the scope of the project, then developing a cost estimate to get the design installed, and a schedule to communicate the timing needs for engineering, procurement, fabrication, installation, commissioning, startup, and ongoing production of the process. Depending on the needed accuracy of the cost estimate and schedule that is required, several iterations of designs are generally provided to customers or stakeholders who feed back their requirements. The process engineer incorporates these additional instructions (scope revisions) into the overall design and additional cost estimates, and schedules are developed for funding approval. Following funding approval, the project is executed via project management. Process engineering activities can be divided into the following disciplines: Various chemical techniques have been used in industrial processes since time immemorial. However, it wasn’t till the advent of thermodynamics and the law of conservation of mass in the 1780’s that process engineering was properly developed and implemented as its own discipline. The set of knowledge that is now known as process engineering was then forged out of trial and error throughout the industrial revolution. The term process, as it relates to industry and production, dates back to the 18th century. During this time period, demands for various products began to drastically increase, and process engineers were required to optimize the process in which these products were created.