Steam-assisted gravity drainage

Steam-assisted gravity drainage (SAGD; 'Sag-D') is an enhanced oil recovery technology for producing heavy crude oil and bitumen. It is an advanced form of steam stimulation in which a pair of horizontal wells is drilled into the oil reservoir, one a few metres above the other. High pressure steam is continuously injected into the upper wellbore to heat the oil and reduce its viscosity, causing the heated oil to drain into the lower wellbore, where it is pumped out. Dr. Roger Butler, engineer at Imperial Oil from 1955 to 1982, invented the steam assisted gravity drainage (SAGD) process in the 1970s. Butler 'developed the concept of using horizontal pairs of wells and injected steam to develop certain deposits of bitumen considered too deep for mining'. In 1983 Butler became director of technical programs for the Alberta Oil Sands Technology and Research Authority (AOSTRA), a crown corporation created by Alberta Premier Lougheed to promote new technologies for oil sands and heavy crude oil production. AOSTRA quickly supported SAGD as a promising innovation in oil sands extraction technology.Petroleum from the Canadian oil sands extracted via surface mining techniques can consume 20 times more water than conventional oil drilling. As a specific example of an underlying data weakness, this figure excludes the increasingly important steam-assisted gravity drainage technique (SAGD) method.'Petroleum from the Canadian oil sands extracted via surface mining techniques can consume 20 times more water than conventional oil drilling. As a specific example of an underlying data weakness, this figure excludes the increasingly important steam-assisted gravity drainage technique (SAGD) method. We encourage future researchers to fill this hole. Steam-assisted gravity drainage (SAGD; 'Sag-D') is an enhanced oil recovery technology for producing heavy crude oil and bitumen. It is an advanced form of steam stimulation in which a pair of horizontal wells is drilled into the oil reservoir, one a few metres above the other. High pressure steam is continuously injected into the upper wellbore to heat the oil and reduce its viscosity, causing the heated oil to drain into the lower wellbore, where it is pumped out. Dr. Roger Butler, engineer at Imperial Oil from 1955 to 1982, invented the steam assisted gravity drainage (SAGD) process in the 1970s. Butler 'developed the concept of using horizontal pairs of wells and injected steam to develop certain deposits of bitumen considered too deep for mining'. In 1983 Butler became director of technical programs for the Alberta Oil Sands Technology and Research Authority (AOSTRA), a crown corporation created by Alberta Premier Lougheed to promote new technologies for oil sands and heavy crude oil production. AOSTRA quickly supported SAGD as a promising innovation in oil sands extraction technology. Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS) Steam_injection_(oil_industry) are two commercially applied primal thermal recovery processes used in the oil sands in Geological formation sub-units, such as Grand Rapids Formation, Clearwater Formation, McMurray Formation, General Petroleum Sand, Lloydminster Sand, of the Mannville Group, a Stratigraphic range in the Western Canadian Sedimentary Basin. Canada is now the single largest supplier of imported oil to the United States, supplying over 35% of US imports, much more than Saudi Arabia or Venezuela, and more than all the OPEC countries combined. Most of the new production comes from Alberta's vast oil sands deposits. There are two primary methods of oil sands recovery. The strip-mining technique is more familiar to the general public, but can only be used for shallow bitumen deposits. However, the more recent steam-assisted gravity drainage technique (SAGD) is better suited to the much larger deep deposits that surround the shallow ones. Much of the expected future growth of production in the Canadian oil sands is predicted to be from SAGD.:9 Steam Assisted Gravity Drainage emissions are equivalent to what is emitted by the steam flood projects which have long been used to produce heavy oil in California's Kern River Oil Field and elsewhere around the world. The SAGD process of heavy oil or bitumen production is an enhancement on the steam injection techniques originally developed to produce heavy oil from the Kern River Oil Field of California. The key to all steam flooding processes is to deliver heat to the producing formation to reduce the viscosity of the heavy oil and enable it to move toward the producing well. The cyclic steam stimulation (CSS) process developed for the California heavy oil fields was able to produce oil from some portions of the Alberta oil sands, such as the Cold Lake oil sands, but did not work as well to produce bitumen from heavier and deeper deposits in the Athabasca oil sands and Peace River oil sands, where the majority of Alberta's oil sands reserves lie. To produce these much larger reserves, the SAGD process was developed, primarily by Dr. Roger Butler of Imperial Oil with the assistance of the Alberta Oil Sands Technology and Research Authority and industry partners. The SAGD process is estimated by the National Energy Board to be economic when oil prices are at least US$30 to $35 per barrel. In the SAGD process, two parallel horizontal oil wells are drilled in the formation, one about 4 to 6 metres above the other. The upper well injects steam, and the lower one collects the heated crude oil or bitumen that flows down due to gravity, plus recovered water from the condensation of the injected steam. The basis of the SAGD process is that thermal communication is established with the reservoir so that the injected steam forms a 'steam chamber'. The heat from the steam reduces the viscosity of the heavy crude oil or bitumen which allows it to flow down into the lower wellbore. The steam and associated gas rise because of their low density compared to the heavy crude oil below, ensuring that steam is not produced at the lower production well, tend to rise in the steam chamber, filling the void space left by the oil. Associated gas forms, to a certain extent, an insulating heat blanket above (and around) the steam. Oil and water flow is by a countercurrent, gravity driven drainage into the lower well bore. The condensed water and crude oil or bitumen is recovered to the surface by pumps such as progressive cavity pumps that work well for moving high-viscosity fluids with suspended solids.