Ultra high frequency

Ultra high frequency (UHF) is the ITU designation for radio frequencies in the range between 300 megahertz (MHz) and 3 gigahertz (GHz), also known as the decimetre band as the wavelengths range from one meter to one tenth of a meter (one decimeter). Radio waves with frequencies above the UHF band fall into the super-high frequency (SHF) or microwave frequency range. Lower frequency signals fall into the VHF (very high frequency) or lower bands. UHF radio waves propagate mainly by line of sight; they are blocked by hills and large buildings although the transmission through building walls is strong enough for indoor reception. They are used for television broadcasting, cell phones, satellite communication including GPS, personal radio services including Wi-Fi and Bluetooth, walkie-talkies, cordless phones, and numerous other applications.ELF 3 Hz/100 Mm 30 Hz/10 MmSLF 30 Hz/10 Mm 300 Hz/1 MmULF 300 Hz/1 Mm 3 kHz/100 kmVLF 3 kHz/100 km 30 kHz/10 kmLF 30 kHz/10 km 300 kHz/1 kmMF 300 kHz/1 km 3 MHz/100 mHF 3 MHz/100 m 30 MHz/10 mVHF 30 MHz/10 m 300 MHz/1 mUHF 300 MHz/1 m 3 GHz/100 mmSHF 3 GHz/100 mm 30 GHz/10 mmEHF 30 GHz/10 mm 300 GHz/1 mmTHF 300 GHz/1 mm 3 THz/0.1 mm Ultra high frequency (UHF) is the ITU designation for radio frequencies in the range between 300 megahertz (MHz) and 3 gigahertz (GHz), also known as the decimetre band as the wavelengths range from one meter to one tenth of a meter (one decimeter). Radio waves with frequencies above the UHF band fall into the super-high frequency (SHF) or microwave frequency range. Lower frequency signals fall into the VHF (very high frequency) or lower bands. UHF radio waves propagate mainly by line of sight; they are blocked by hills and large buildings although the transmission through building walls is strong enough for indoor reception. They are used for television broadcasting, cell phones, satellite communication including GPS, personal radio services including Wi-Fi and Bluetooth, walkie-talkies, cordless phones, and numerous other applications. The IEEE defines the UHF radar band as frequencies between 300 MHz and 1 GHz. Two other IEEE radar bands overlap the ITU UHF band: the L band between 1 and 2 GHz and the S band between 2 and 4 GHz. Radio waves in the UHF band travel almost entirely by line-of-sight propagation (LOS) and ground reflection; unlike in the HF band there is little to no reflection from the ionosphere (skywave propagation), or ground wave. UHF radio waves are blocked by hills and cannot travel beyond the horizon, but can penetrate foliage and buildings for indoor reception. Since the wavelengths of UHF waves are comparable to the size of buildings, trees, vehicles and other common objects, reflection and diffraction from these objects can cause fading due to multipath propagation, especially in built-up urban areas. Atmospheric moisture reduces, or attenuates, the strength of UHF signals over long distances, and the attenuation increases with frequency. UHF TV signals are generally more degraded by moisture than lower bands, such as VHF TV signals. Since UHF transmission is limited by the visual horizon to 30–40 miles (48–64 km) and usually to shorter distances by local terrain, it allows the same frequency channels to be reused by other users in neighboring geographic areas (frequency reuse). Radio repeaters are used to retransmit UHF signals when a distance greater than the line of sight is required. Occasionally when conditions are right, UHF radio waves can travel long distances by tropospheric ducting as the atmosphere warms and cools throughout the day. The length of an antenna is related to the length of the radio waves used. Due to the short wavelengths, UHF antennas are conveniently stubby and short; at UHF frequencies a quarter-wave monopole, the most common omnidirectional antenna is between 2.5 and 25 cm long. UHF wavelengths are short enough that efficient transmitting antennas are small enough to mount on handheld and mobile devices, so these frequencies are used for two way land mobile radio systems, such as walkie-talkies, two way radios in vehicles, and for portable wireless devices; cordless phones and cell phones. Omnidirectional UHF antennas used on mobile devices are usually short whips, sleeve dipoles, rubber ducky antennas or the planar inverted F antenna (PIFA) used in cellphones. Higher gain omnidirectional UHF antennas can be made of collinear arrays of dipoles and are used for mobile base stations and cellular base station antennas. The short wavelengths also allow high gain antennas to be conveniently small. High gain antennas for point-to-point communication links and UHF television reception are usually Yagi, log periodic, corner reflectors, or reflective array antennas. At the top end of the band slot antennas and parabolic dishes become practical. For satellite communication, helical, and turnstile antennas are used since satellites typically employ circular polarization which is not sensitive to the relative orientation of the transmitting and receiving antennas. For television broadcasting specialized vertical radiators that are mostly modifications of the slot antenna or reflective array antenna are used: the slotted cylinder, zig-zag, and panel antennas. UHF television broadcasting fulfilled the demand for additional over-the-air television channels in urban areas. Today, much of the bandwidth has been reallocated to land mobile, trunked radio and mobile telephone use. UHF channels are still used for digital television. Since at UHF frequencies transmitting antennas are small enough to install on portable devices, the UHF spectrum is used worldwide for land mobile radio systems, two-way radios used for voice communication for commercial, industrial, public safety, and military purposes. Examples of personal radio services are GMRS, PMR446, and UHF CB. Some wireless computer networks use UHF frequencies. The widely adopted GSM and UMTS cellular networks use UHF cellular frequencies.