Effective radiated power

Effective radiated power (ERP), synonymous with equivalent radiated power, is an IEEE standardized definition of directional radio frequency (RF) power, such as that emitted by a radio transmitter. It is the total power in watts that would have to be radiated by a half-wave dipole antenna to give the same radiation intensity (signal strength in watts per square meter) as the actual source at a distant receiver located in the direction of the antenna's strongest beam (main lobe). ERP measures the combination of the power emitted by the transmitter and the ability of the antenna to direct that power in a given direction. It is equal to the input power to the antenna multiplied by the gain of the antenna. It is used in electronics and telecommunications, particularly in broadcasting to quantify the apparent power of a broadcasting station experienced by listeners in its reception area.ELF 3 Hz/100 Mm 30 Hz/10 MmSLF 30 Hz/10 Mm 300 Hz/1 MmULF 300 Hz/1 Mm 3 kHz/100 kmVLF 3 kHz/100 km 30 kHz/10 kmLF 30 kHz/10 km 300 kHz/1 kmMF 300 kHz/1 km 3 MHz/100 mHF 3 MHz/100 m 30 MHz/10 mVHF 30 MHz/10 m 300 MHz/1 mUHF 300 MHz/1 m 3 GHz/100 mmSHF 3 GHz/100 mm 30 GHz/10 mmEHF 30 GHz/10 mm 300 GHz/1 mmTHF 300 GHz/1 mm 3 THz/0.1 mm Effective radiated power (ERP), synonymous with equivalent radiated power, is an IEEE standardized definition of directional radio frequency (RF) power, such as that emitted by a radio transmitter. It is the total power in watts that would have to be radiated by a half-wave dipole antenna to give the same radiation intensity (signal strength in watts per square meter) as the actual source at a distant receiver located in the direction of the antenna's strongest beam (main lobe). ERP measures the combination of the power emitted by the transmitter and the ability of the antenna to direct that power in a given direction. It is equal to the input power to the antenna multiplied by the gain of the antenna. It is used in electronics and telecommunications, particularly in broadcasting to quantify the apparent power of a broadcasting station experienced by listeners in its reception area. An alternate parameter that measures the same thing is effective (or equivalent) isotropic radiated power (EIRP). Effective isotropic radiated power is the total power that would have to be radiated by a hypothetical isotropic antenna to give the same signal strength as the actual source in the direction of the antenna's strongest beam. The difference between EIRP and ERP is that ERP compares the actual antenna to a half-wave dipole antenna, while EIRP compares it to a theoretical isotropic antenna. Since a half-wave dipole antenna has a gain of 1.64, or 2.15 decibels compared to an isotropic radiator, if ERP and EIRP are expressed in watts their relation is