A Stabilization Method Based on an Adaptive Feedforward Controller for the Underactuated Bipedal Walking with Variable Step-Length on Compliant Discontinuous Ground
2020
Both compliance and discontinuity are the common characteristics of the real ground surface. This paper proposes a stabilization method for the underactuated bipedal locomotion on the discontinuous compliant ground. Unlike a totally new control method, the method is actually a high-level control strategy developed based on an existing low-level controller meant for the continuous compliant ground. As a result, although the ground environment is more complex, the calculation cost for the robot walking control system is not increased. With the high-level control strategy, the robot is able to adjust its step-length and velocity simultaneously to stride over the discontinuous areas on the compliant ground surface. The effectiveness of the developed method is validated with a numerical simulation and a physical experiment.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
27
References
0
Citations
NaN
KQI