Insights into Instabilities in Burning and Acoustically Levitated Nanofluid Droplets

The complex multiscale physics of nanoparticle laden functional droplets in a reacting environment is of fundamental and applied significance for a wide variety of applications ranging from thermal sprays to pharmaceutics to modern day combustors using new brands of bio-fuels. Understanding the combustion characteristics of these novel fuels (laden with energetic nanoparticle NP) is pivotal for lowering ignition delay, reducing pollutant emissions and increasing the combustion efficiency in next generation combustors. On the way to understanding the complex dynamics of sprays is to first study the behaviour of an isolated droplet. A single droplet represents a sub-grid unit of spray. In vaporizing functional droplets under high heat flux conditions, the bubble formation inside the droplet represents an unstable system. This may be either through homogenous nucleation at the superheat limit or by dispersed nanoparticle acting as heterogeneous nucleation sites. First it is shown that such self-induced boiling in burning functional pendant droplets can induce severe volumetric shape oscillations in the droplet. Internal pressure build-up due to ebullition activity force ejects bubbles from the droplet domain causing undulations on the droplet surface and oscillations in bulk thereby leading to secondary break-up of the primary droplet. Through experiments, it is established that the degree of droplet deformation depends on the frequency and intensity of these bubble expulsion events. However, in a distinct regime of single isolated bubble growing inside the droplet, pre-ejection transient time is identified by Darrieus-Landau (DL) instability at the evaporative bubble-droplet interface. In this regime the bubble-droplet system behaves as a synchronized driver-driven system with bulk bubble-shape oscillations being imposed on the droplet. However, the agglomeration of suspended anaphase additives modulates the flow structures within the droplet and also influences the bubble inception and growth leading to distinct atomization characteristics. Secondly, the secondary atomization characteristics of burning bi-component (ethanol-water) droplets containing titania nanoparticle (NPs) at both dilute (0.5% and 1% by weight) and dense particle loading rates (PLR: 5% and 7.5 wt. %) are studied experimentally at atmospheric pressure under normal gravity. It is observed that both types of nanofuel droplets undergo distinct modes of secondary break-up that are primarily responsible for transporting particles from the droplet domain to the flame zone. For dilute nanosuspensions, disruptive response is characterized by low intensity atomization modes that cause small-scale localized flame distortion. In contrast, the disruption behavior at dense concentrations is governed by high intensity bubble ejections which result in severe disruption of the flame envelope. The atomization events occur locally at the droplet surface while their cumulative effect is observed globally at the droplet scale. Apart from this, a feedback coupling…