An analytical model of burnishing forces using slab method

During the processing of material by burnishing operations, tangential and normal forces play a key role in determining the burnished surface quality, surface hardness, fatigue life, and state of residual stress. However, prediction of the burnishing force in major portions of the paper was based on the micromechanical force model on surface asperities that contain many simplifications and makes the understanding of the model quite complex. In the present work, an analytical study has been carried out to predict the ball burnishing forces in the tangential and normal directions. Firstly, 2D geometrical model of the process was developed to identify the acting forces and their relevant directions during burnishing. Then the forces were related to the burnishing pressure that is calculated by the slab method analysis. The obtained results were further verified by experimental trials. In addition, the developed models were used to analyze the effect of burnishing input variables such as feed rate, burnishing...