REVERT: A Network Failure Recovery Method for Data Center Networks

As a repository that holds computing facilities, storage facilities, network facilities and other facilities, the Software Defined Data Center (SDDC) can provide computing and storage resources for users. For a SDDC, it is important to provide continuous services for users. Hence, in order to achieve high reliability in Software Defined Data Center Networks (SDDCNs), a network failure recovery method for software defined data center networks (REVERT) is proposed to recover failures in SDDCNs. In REVERT, the network failures that occurred in SDDCNs are classified into three types, which are switch failure, failure of links among switches and failure of links between switches and servers. Specially, except recovering the switch failure and failure of links between switches, REVERT can also recover the failures of links between the switches and servers. To achieve that, a failure preprocessing method used to classify the network failures, a data structure for storing and finding the affected flows, a server cluster agent for communicating with the server clustering algorithm and a routing path calculation method are designed in REVERT. Meanwhile, REVERT has been implemented and evaluated on RYU controller and Mininet using three routing algorithms. Compared with the link usage before recovering the network failures, when there are more than 200 flows in the network, the mean link usages only slightly increase at about 1.83 percent. More importantly, the evaluation results also demonstrate that except recovering switch failures, intra-topo link failures, REVERT has the ability of recovering failures of links between servers and edge switches successfully.