Avaliação de solos com adições de cimento em bases e sub-bases de pavimentos flexíveis

2020 
O solo e de extrema importância para a construcao civil, devendo apresentar boa resistencia e suportar as cargas impostas para o que foi projetado. O objetivo da pesquisa foi comparar a resistencia de solo natural e com adicao de cimento, para que seja utilizado em pavimentacoes flexiveis, aumentando sua vida util. Os solos testados foram Cambissolo e Latossolo. Inicialmente foi determinada a umidade otima por meio do ensaio de Proctor, obtendo-se 26,40% de umidade otima para o Cambissolo e 30,42% para o Latossolo. Em seguida realizaram-se ensaios de compressao axial com diferentes porcentagens de cimento, nos quais o Cambissolo mostrou-se menos resistente que o Latossolo, para todos os fatores analisados. Para o Cambissolo, ao se adicionar 50% de cimento, foi observado um aumento de resistencia de dezesseis vezes maior que o solo natural. Para o Latossolo, esse aumento, mantida a mesma porcentagem de cimento, foi de aproximadamente nove vezes. Confirmou-se ainda que, em ambos os solos, a adicao do cimento aumenta sua resistencia. Tambem foram realizados ensaios de cisalhamento direto, nos quais o Latossolo mostrou-se mais resistente que o Cambissolo, sendo capaz de absorver mais esforcos nele solicitados. Nestes ensaios, os resultados nao foram significativos como previsto para o Cambissolo. Para o Latossolo in natura, quando os corpos de prova foram submetidos ao menor peso (70 kgf) resistiram a 597 KPa e esta resistencia foi crescente a medida que os pesos foram aumentando, chegando ao valor maximo de 870 KPa, quando submetidos ao maior peso (190 kgf). Palavras-chaves: Cambissolo. Latossolo. Resistencia.   Analysis of cement-modified soils for application in bases and subbases of flexible pavements  Abstract The soil is extremely important for civil construction, and must have good resistance and withstand the loads imposed for what was designed. The objective of the research was to compare the resistance of natural soil and with the addition of cement, so that it is used in flexible pavements, increasing its useful life. Cambisol and Latosol were analyzed in this work. First, the optimum moisture was determined by Proctor essay, obtaining 26.40% of optimum moisture for Cambisol and 30.42% for Latosol. Then, axial compression tests were carried out with different percentages of cement, in which the Cambisol was less resistant than the Latosol for all factors analyzed. For Cambisol, by adding 50% of cement, an increase in strength of sixteen times greater than natural soil was observed. For the Latosol, this increase, maintained the same percentage of cement, was approximately of nine times. It was also confirmed that, in both soils, the addition of cement increases its strength. Direct shear tests were also performed, in which the Latosol was more resistant than the Cambisol, being able to absorb more efforts requested. In these trials, results were not significant as predicted for Cambisol. For the Latosol in natura, when the specimens were submitted to the lowest weight (70 kgf) they resisted to 597 KPa and this resistance increased as the weights increased, reaching the maximum value of 870 KPa, when submitted to the highest weight (190 kgf). Keywords: Cambisol. Latosol. Resistance.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    4
    References
    0
    Citations
    NaN
    KQI
    []