Visualization experiments of biodegradation in porous media and calculation of the biodegradation rate

Biodegradation in porous media is studied with carefully controlled and well-characterized experiments in model porous media constructed of etched glass. Porous media of this type allow visual observation of the phenomena that take place at pore scale. An aqueous solution of five organic pollutants (toluene, phenol, o-cresol, naphthalene and 1,2,3-trimethylbenzene) was used as a model NAPL (representing creosote). The bacteria used were Pseudomonas fluorescens, which are indigenous (even predominant) in many contaminated soils. The maximum aqueous concentrations of the specific organic substances, below which biodegradation becomes possible, were determined as a function of temperature from toxicity experiments. Visualization experiments were made under various flow velocities and organic loadings to study the morphology and thickness of the biofilm as a function of the pore size and the distance from the entrance, and the efficiency of biodegradation. The efficiency of biodegradation decreased as the aqueous concentration of NAPL at the inlet increased and/or as the flow velocity increased. The thickness of biofilm decreased as the distance from the inlet increased and/or the pore diameter decreased. A quasi-steady-state theoretical model of biodegradation was used to calculate the values of the mesoscopic biochemical rates and to predict the profile of NAPL concentration in the porous medium and the thickness of biofilm in pores. The agreement between experimental data and model predictions is quite satisfactory.