Microstructure and tribological properties of gray cast iron specimens coated by aluminizing, boronizing, chromizing and siliconizing

In this study, aluminized, boronized, chromized and siliconized gray cast iron plate specimens were prepared, and their microstructures and tribological properties were investigated. The surfaces of the aluminized, boronized, chromized and siliconized specimens mainly consisted of FeAl, Fe2B, (Cr, Fe)23C6 and FeSi phases, respectively. Also, the surface of the boronized specimen exhibited the highest microvickers hardness of all the specimens. The aluminized, boronized and chromized specimens exhibited friction coefficients as low as the non-coated specimens when sliding against AISI 52100 steel ball specimens in poly-alpha-olefin. In addition, the boronized and chromized specimens exhibited much higher wear resistance than the non-coated specimens.