Fungal textile alternatives from bread waste with leather-like properties

Abstract Food waste and fashion pollution are two of the most prominent global environmental issues. To alleviate the problems associated with food waste, while simultaneously contributing to sustainable fashion, the feasibility of making an alternative textile material with leather-like properties from fungal biomass cultivated on bread waste was investigated. The filamentous fungus, Rhizopus delemar, was successfully grown on waste bread in a submerged cultivation process, and fungal biomass was treated with vegetable tannin of chestnut wood. NMR and FTIR confirmed interactions between tannin and fungal biomass, while OM, SEM and AFM visualised the changes in the hyphae upon the tannin treatment. Thermal stability was assessed using TGA analysis. The wet-laid technique commonly utilised for paper-making was used to prepare sheets of hyphae. Some of the sheets were treated with glycerol and/or a biobased binder as post-treatment. Overall, three of the produced materials exhibited leather-like properties comparable to that of natural leather. Sheets from untreated biomass with only glycerol post-treatment showed a tensile strength of 7.7 MPa and an elongation at break of 5%. Whereas sheets from untreated biomass and tannin treated biomass with both glycerol and binder treatments led to tensile strengths of 7.1 MPa and 6.9 MPa, and the elongation at break of 12% and 17%, respectively. The enhancement of hydrophobicity after the binder treatment, helped to preserve the absorbed glycerol within the sheet and thereby the flexibility was retained when in contact with moisture. These findings demonstrate that bread waste-derived fungal sheets have great potential as environmentally friendly materials with leather-like properties.