Development of a New Flowsheet for Co-Separating the Transuranic Actinides: The "Euro-GANEX" Process

A flowsheet for a novel GANEX (Grouped ActiNide EXtraction) process has been tested in a spiked flowsheet trial in a 32 stage plutonium-active centrifugal contactor rig with a simulant feed that contained 10 g/L plutonium as well as some fission products and other transuranic actinides. The solvent system used was a combination of 0.2 mol/L N,N,N’,N’-tetraoctyl diglycolamide (TODGA) and 0.5 mol/L N,N’-(dimethyl-N,N’-dioctylhexylethoxy-malonamide (DMDOHEMA) in a kerosene diluent that co-extracted actinides and lanthanides. Actinides were subsequently selectively co-stripped away from the lanthanides using a sulphonated and, therefore, hydrophilic bis-triazinyl pyridine (BTP) complexant in conjunction with acetohydroxamic acid (AHA). Plutonium and americium recoveries were high with decontamination factors across the strip contactors of ˜14,000 and ˜390, respectively. However, approximately 30% of neptunium was lost to the aqueous raffinate which was due to recycling within the first extract-scrub section c...