A Low-profile Programmable Beam Scanning Holographic Array Antenna without Phase Shifters

Beam scanning antenna brings new opportunities to reduce the data collision of multi-node communication in the Internet of Things (IoT). This paper proposes a new type antenna design scheme that can be used for IoT relay communication. A programmable beam scanning antenna without phase shifters operating in the X-band is designed to evaluate the feasibility of this scheme. The integrated design of excitation source and phasemodulated structure greatly reduces the profile of the antenna and improves the integrated degrees of freedom with other equipment. By switching the state of the PIN diode loaded on each element, different radiators can be selected and the direction of current polarization on elements can be adjusted to change the radiation phase. Furthermore, the diode states are encoded by the holographic antenna theory and controlled by the FPGA controller to realize programmable beam scanning. One element, two-element and 1-D array containing 32 elements are fabricated and measured. Experimental results are in good agreement with the simulation data. The operating bandwidth is 7.5% at 10GHz while the beam scanning range of the array is -60∘ 60∘, with a good scanning accuracy and stability. The proposed low-profile beam scanning antenna can provide stable communication services to multiple users and smart devices as a new type of beam scanning array antenna solution for the IoT application, which is beneficial to this field.