NATURE OF SEISMIC REFLECTIONS AND VELOCITIES FROM VSP-EXPERIMENTS AND BOREHOLE MEASUREMENTS AT THE KTB DEEP DRILLING SITE IN SOUTHEAST GERMANY

Abstract The 1989 VSP program at the KTB pilot hole was complemented in 1992 by a standard VSP in the KTB super-deep borehole from 3000 to 6013 m. P-wave velocities oscillate around 5.8 km/s in the upper 3150 m in accordance with sonic log velocities and correlate with paragneisses which prevail in this depth range. At about 3150 m depth, velocities increase to 6.4 km/s correlating with metabasites which dominate in the depth range 3150 to 7500 m. Laboratory measurements and petrophysical modelling provide evidence that the intrinsic velocities were reduced by 5–10% by fracture density and porosity at all depth ranges. Subvertical dip (50–70°) in structures and textures prevail, causing about 10% S-wave anisotropy, indicated by direct observations of S-wave splitting. Pronounced P-wave reflections, accompanied by P- to S-wave conversions and a lack of S-wave reflections, occur in the lower depth range only (3000–6000 m) and correlate with fluid-filled fracture systems. Lithological contrasts (gneiss-amphibolite) play a minor role in generating reflections. The most prominent reflecting elements known from surface profiling and 3D-surveys (i.e. the ‘Franconian Lineament’ reflector at about 7 km, and P-wave reflections at 8.3 km with notably absent associated S-wave reflections) coincide with pronounced anomalies observed in the logging data indicating the presence of major fracture zones.