Leaching kinetics of ionic rare-earth in ammonia-nitrogen wastewater system added with impurity inhibitors

Abstract Ammonia-nitrogen wastewater is produced during the dressing and smelting process of rare-earth ores. Such wastewater includes a very high concentration of NH 4 + , as well as other ions (e.g., NH 4 + , RE 3+ , Al 3+ , Fe 3+ , Ca 2+ , Cl − , and SiO 3 2– ) with a pH of 5.4–5.6. Its direct discharge will pollute, yet it can be recycled and used as a leaching reagent for ionic rare-earth ores. In this study, leaching kinetics studies of both rare earth ions and impurity ion Al 3+ were conducted in the ammonia-nitrogen wastewater system with the aid of impurity inhibitors. Results showed that the leaching process of rare-earth followed the internal diffusion kinetic model. When the temperature was 298 K and the concentration of NH 4 + was 0.3 mol/L, the leaching reaction rate constant of ionic rare-earth was 1.72 and the apparent activation energy was 9.619 kJ/mol. The leaching rate was higher than that of conventional leaching system with ammonium sulfate, which indicated that ammonia-nitrogen wastewater system and the addition of impurity inhibitors could promote ionic rare-earth leaching. The leaching kinetic process of impurity Al 3+ did not follow either internal diffusion kinetic model or chemical reaction control, but the hybrid control model which was affected by a number of process factors. Thus, during the industrial production the leaching of impurity ions could be reduced by increasing the concentration of impurity inhibitors, reducing the leaching temperature to a proper range, accelerating the seepage velocity of leaching solution, or increasing the leaching rate of rare earths.