Development of design for large scale conductors and coils using MgB2 for superconducting magnetic energy storage device

Abstract MgB 2 wires are commercially available, and their superconducting characteristics have been continuously developed in the last decade. The relatively high critical temperature of these wires has attracted the attention of researchers, especially in the field of superconducting magnetic energy storage (SMES) coil applications in terms of its relatively high critical temperature, as it enables the use of liquid hydrogen for cooling the coils. The sensitivity of multi-filament MgB 2 wires to bending strain makes the design of large-scale conductors and coils for an SMES system technologically difficult, and the careful investigation of the applied strains during manufacturing is required. Two-conventional methods have been introduced for the fabrication of the coils: wind-and-react (W&R) and react-and-wind (R&W). These methods have been demonstrated to be suitable for the production of large-scale MgB 2 magnets to maximize the coil performance. The W&R and R&W methods have been successfully applied to the designs of conductors and coils, and small W&R test coil fabrication, as well as stability demonstrations are performed in this study. Our study is the first to demonstrate the feeding of hundreds of amperes of transport current using multifilamentary MgB 2 wires at around liquid hydrogen temperature in the practical background magnetic field of 2 T. The minimum quench energy and normal zone propagation velocity are also experimentally investigated for the protection of the actual coils for SMES application.