Friction law and turbulent properties in a laboratory Ekman boundary layer

We use spin-up/spin-down laboratory experiments to study the neutrally stratified Ekman boundary layer. The experiments are performed in the 13 m diameter, 1 m deep Coriolis rotating tank of the LEGI in Grenoble, France. A global flow rotation is produced by an initial change in the tank rotation speed. It then slowly decays under the effect of Ekman friction, evolving from the turbulent state to the laminar state. It is checked that the Ekman layer itself remains in a quasi-steady state during this decay. The velocity is measured by Particle Imaging Velocimetry (PIV) at two scales: the global rotation in a horizontal plane, and the vertical profile inside the boundary layer, where the three velocity components are obtained by stereoscopic PIV. The friction law is obtained by relating the decay rate of the bulk velocity to the velocity itself. This method is justified by the fact that this bulk velocity is independent of height beyond the top of the boundary layer (a few cm), as expected from the Taylor-P...