Comparison of enamel surface roughness and color alteration after bracket debonding and polishing with 2 systems: A split-mouth clinical trial.

Introduction This split-mouth randomized clinical trial aimed to compare the enamel surface roughness (SR) and color alteration after bracket debonding and polishing using 2 systems. Methods After removal of excess adhesive using a 12-blade tungsten carbide bur on a low-speed handpiece, a randomized polishing procedure using Sof-Lex discs was applied on 1 side (n = 36) and Sof-Lex Spiral Wheels on the contralateral side (n = 36). Dental replicas were obtained with epoxy resin before bracket bonding and after tooth polishing. The SR was evaluated using a profilometer. The color was assessed using an Easyshade spectrophotometer before bracket bonding, immediately after tooth polishing, and 30 days after polishing. Two-way analysis of variance and t tests were applied for statistical analysis. Results The SR of enamel showed similar results between the polishing systems (P = 0.309) and between moments (before bracket bonding and after tooth polishing) (P = 0.317). The color change was also similar between the polishing systems (P >0.05). Conclusions The Sof-Lex discs and Sof-Lex Spiral Wheel polishing systems used after removal of excess adhesive using a 12-blade tungsten carbide bur on a low-speed handpiece did not appear to significantly damage the enamel surface, and the color change was similar between them.