Miniaturized Radio Tranceiver for PocketQubes, Exceeding Performance of CubeSat Solutions

2020 
In this paper, a detailed design is presented of a communications module that is designed to fit tight PocketQube design budgets but still offer performance at least comparable to commercial off-the-shelf CubeSat solutions. The communications module features extremely efficient power usage, less than 2 Watt DC for 1 Watt RF output while fitting in an extremely small volume, (42 x 42 x 8mm, approximately a quarter of the volume of CubeSat solutions). Our system also features a new communication scheme based on Short Block LPDC codes that provides a very high code gain (approximately 6dB for hard-decision and 9dB for soft-decision) using a high code rate. A ground modem implementation based on GNURadio is also presented, taking advantage of a new implementation for low-latency asynchronous data transmission.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    4
    References
    0
    Citations
    NaN
    KQI
    []