Interfacial microstructure and mechanical properties of titanium/steel dissimilar joining

2022 
Abstract Cu-base fillers with different V ratios were designed for the butt joining of explosion-welded titanium/steel bimetallic plate. The Cu-V-Ag weld metals are all consisted of Cu solid solution and Fe-Ti intermetallics. The lower V content (∼5 wt%) results in the formation of extensive Cu-Ti compounds at Cu5V10Ag/ERTi-1 interface. Brittle σ-FeV intermetallics are formed at steel/Cu30V10Ag interface when the V content increases to ∼30 wt%. The regions with considerable amount of FeTi, Cu4Ti, CuTi2 compounds present relatively higher cracking sensitivity. The resultant weld metals shows significantly different hardness distribution and low bending toughness. The strategies for improving the overall mechanical properties in the future are suggested.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    18
    References
    0
    Citations
    NaN
    KQI
    []