Superthin multilayer mirror
1996
The rule of the distortion introduced by pressure and thermal stresses in the active cooling mirror were proved experimentally. In order to minimize the distortion of a mirror the active cooing mirror should be consisted of a thin faceplate layer, a good heat exchanger layer and a hard rigidity substrate. According to this requirement of a superthin multilayer mirror were designed. Its maximum distortion was only 0.10 micrometers , when the 8.69kw laser beam was incident on the surface of mirror and the coolant pressure was 0.13MPa.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI