Microstructural features assessment of different waterlogged wood species by NMR diffusion validated with complementary techniques.

Abstract Wood is a hygroscopic, multi-scale and anisotropic natural material composed of pores with different size and differently oriented. In particular, archaeologically excavated wood generally is waterlogged wood with very high moisture content (400%–800%) that need to have a rapid investigation at the microstructural level to obtain the best treatment with preservative agents. Time-dependent diffusion coefficient D(t) quantified by Pulse Field Gradient (PFG) Nuclear Magnetic Resonance (NMR) techniques provides useful information about complex porous media, such as the tortuosity (τ) describing pore connectivity and fluid transport through media, the average-pore size, the anisotropic degree (an). However, diffusion NMR is intrinsically limited since it is an indirect measure of medium microstructure and relies on inferences from models and estimation of relevant diffusion parameters. Therefore, it is necessary to validate the information obtained from NMR diffusion parameters through complementary investigations. In this work, the structures of five waterlogged wood species were studied by PFG of absorbed water. D(t) and τ of water diffusing along and perpendicular to vessels/tracheids main axes together with relaxation times and an were quantified. From these parameters, the pore sizes distribution and the wood microstructure characterization were obtained. Results among wood species were compared, validated and integrated by micro-imaging NMR (μ-MRI), environmental-scanning electron-microscope (ESEM) images, wood dry density and imbibition times measurement of all woods. The work suggests that an vs τ rather than the estimated pore size diversifies and characterize the different wood species. As a consequence diffusion-anisotropy vs tortuosity could be an alternative method to characterize and differentiate wood species of waterlogged wood when high resolution images (μ-MRI and ESEM) are not available. Moreover, the combined use of D(t) and micro-MRI expands the scale of dimensions observable by NMR covering all the interesting length scales of wood.