Study on the plasma erosion resistance of ZrO2p(3Y)/BN–SiO2 composite ceramics

Abstract ZrO 2p (3Y)/BN–SiO 2 composite ceramics were prepared by hot pressed sintering. The Kr plasma was incident normally to the sample surface to measure the plasma erosion resistance, and XRD, TEM, SEM were used to characterize the phase composition and morphology of composite ceramics before and after Kr plasma erosion. The composites were composed of h-BN, amorphous SiO 2 , m-ZrO 2 and t-ZrO 2 , which keep stability in the process of Kr plasma sputtering. Two kinds of zirconia phases (t-ZrO 2 , m-ZrO 2 ) and lamellar h-BN evenly distributed in ZrO 2p (3Y)/BN–SiO 2 composite ceramics, and the lath microstructures were observed in m-ZrO 2 particles. The plasma erosion resistances of ceramic composites increase significantly with the increase of ZrO 2 content. Pits with diameter sizes of several micrometers were observed on the surface of composites after plasma sputtering, which indicate that one or several grains are sputtered out during the plasma sputtering process. The edges of the grains become smoother for the preferential sputtering to the sharp edge of the grains during plasma sputtering.