The Influence of Partial Substitution of Malt with Unmalted Wheat in Grist on Quality Parameters of Lager Beer

The aim of this research was to assess whether the grist mixture (50% malt, 34% maize grits, and 16% unmalted wheat) used for the production of beer 1 could be appropriate for lager to retain the declared quality and colloidal stability during the commercial shelf life (6 months) in regards to beer 2 produced completely out of barley malt. Raw materials, worts, and beers were analyzed before and after production and over the period of 6-month storage. All analyses were done in accordance with the European Brewery Convention methods. Beer 1 resulted in a more desirable wort composition considering the total, high molecular weight (HMW) proteins, and viscosity. Beer 1 had less total proteins and polyphenols, lower viscosity and color, and higher starting clarity than beer 2. Haze measurements showed that even though beer 1 had lower starting haze, it resulted in significantly less colloidal stability during the storage of 6 months, in comparison to beer 2. The results indicate that the production of light lager beer using unmalted wheat in grist could be acceptable for colloidal stability only if such beer is to be stabilized by operations that ensure the removal of haze inducers (primarily haze active proteins).