Preparation and Characterization of Outdoor Bamboo-Fiber-Reinforced Composites with Different Densities

Outdoor bamboo-fiber-reinforced composites (OBFRCs) with four different densities were prepared, and the microstructure and physicomechanical properties of pristine samples were evaluated. In addition, the surface color, glossiness, roughness, water absorption, and wettability of the samples were tested to investigate the effects of panel density on the extent of surface weathering due to ultraviolet radiation. The results showed that the OBFRCs exhibited excellent physical and mechanical properties, which improved with increasing density. However, increases in the density led to decreases in the hygroscopicity and dimensional stability of the OBFRCs. After weathering, the surface contact angle and surface roughness increased, and the dimensional stability improved. The surface glossiness, water absorption, and surface free energy decreased. A higher density resulted in improved color stability, which suggested that density played an important role in determining surface photodegradation properties. Thus, density-increasing treatments had positive effects on the physical and mechanical properties as well as the color stability and wettability of the OBFRCs, but they may negatively affect the roughness and dimensional stability. Based on service-performance and cost-minimization considerations, 1.1 g/cm3 was determined as the most appropriate density for general applications.