Dynamic displacements‐based model updating with motion capture system

Summary In this paper, a dynamic displacements-based model updating method using a motion capture system (MCS) is proposed. The dynamic characteristics from MCS are used to find the parameters that minimize the difference between updated model and direct measurement. Using a multi-objective optimization algorithm of non-dominated sorting genetic algorithm-II, the number of objective functions for model updating is set to the same number of modes under consideration, and all the objective function are simultaneously minimized. To consider the contribution of each mode on model updating and to avoid biased results, a rule for weighting of solutions associated to each mode based on modal participation factors is suggested and tested. Using a free vibration experimental test of a three-story shear model, the performance of model updating method is verified by the comparison of the dynamics characteristics between the updated model and direct measurement by MCS. In addition, time histories of displacements from the updated model are compared with the direct measurement. Copyright © 2016 John Wiley & Sons, Ltd.