Emissivity change in pressure-shear plate impact experiment
2020
Concurrent temperature measurement in a Pressure-Shear Plate Impact (PSPI) experiment has been developed by collecting the infrared radiation emitted from the sample/rear-plate interface. In order to convert the measured emittance to sample temperature accurately, the dynamic emissivity of the sample/rear-plate interface is required. The initial emissivity is calibrated statically by comparing the collected emittance from the sample surface with that of a surface with known emissivity. In a PSPI experiment the effective emissivity may change due to pressure-shear loading. At thermodynamic equilibrium, the dynamic change of emissivity could be indicated through the change of reflectivity. Pilot experiments are conducted to gain a qualitative understanding of, if and by how much, the emissivity changes during a PSPI experiment. A CO2 laser is used to reflect an incident beam off the sample/rear-plate interface. The intensity of this reflected beam is monitored by a fast HgCdTe detector through a pair of 90° off-axis parabolic reflectors. This measured change of intensity during a PSPI experiment provides an indication of the required change of emissivity.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
9
References
0
Citations
NaN
KQI