A process and load adjusted coating system for metallic inserts in hybrid composites

According to the concept of an intrinsic hybrid composite, adhesive bonding is designed for generating the connection between the applied fiber reinforced polymer and a metallic insert. To induce adhesive bonding, a metallic insert, made of aluminum, is coated. This contribution focusses on the development of a suitable coating system. To this end, the coating system must meet certain requirements. On one hand, demands on the coating like ductility can be deduced from analyzing the manufacturing process. On the other hand, requirements like corrosion protection as well as high static and dynamic strength arise from specific applications under considerations. The utilized coating system is based on organically modified silicate layers (Ormosil) applied using a sol–gel process. To prove that this coating system fulfils the requirements, the corrosion protection is analysed by impedance spectroscopy. Furthermore, different mechanical experimental investigations are performed to verify the ductility of the coating as well as the strength of the resulting interface. Hence, it is shown that the considered coating system can be applied for the analysed intrinsic hybrid composite manufactured in series.