Petrography of construction and demolition waste (CDW) from Abruzzo region (Central Italy)

Abstract The density, colour and texture, plus mineral and chemical features of 18 ceramic-like CDW samples from the Abruzzo region (Central Italy) were characterised. The concretes, natural stones, tiles, roof-tiles, bricks and perforated bricks are either aphanitic to porphyric. Concretes and natural stones are grey to white and tend to be > 2.0 g/cm3; the masonries are brown to reddish and close to  40 wt%) and LOI (volatiles, CO2 + H2O). The masonries are instead calcite-, CaO- ( The petrography of CDW concretes is similar among geographical areas with abundance of limestones used as aggregates. However, in limestone-poor areas CDW are SiO2- and Al2O3-rich, reflecting the prevalent use of masonry and/or silicate-rich construction materials, implying that each geographical area is characterised by peculiar CDW composition. Therefore, the knowledge of mesoscopic, physical and petrographic aspects has to be known for planning adequate sorting methods, promoting upcycling reusing applications. Some of the studied CDW samples are susceptible to release relative high Cr and As content.