Porosity dependence of elastic moduli of snow and firn

Measurements of elastic wave velocities enable non-destructive estimation of the mechanical properties, elastic moduli and density of snow and firn. The variation of elastic moduli with porosity in dry snow and firn is modeled using a differential effective medium scheme modified to account for the critical porosity above which the bulk and shear moduli of the ice frame vanish. A comparison of predicted and measured elastic moduli indicates that the shear modulus of ice in snow is lower than that computed from single crystal elastic stiffnesses of ice. This may indicate that the bonds between snow particles are more deformable under shear than under compression. A partial alignment of ice crystals also may contribute. Good agreement between elastic stiffnesses of the ice frame obtained from elastic wave velocity measurements and the predictions of the theory is observed. The approach is simple and compact, and does not require the use of empirical fits to the data. Owing to its simplicity, this model may prove useful in a variety of potential applications such as construction on snow, interpretation of seismic measurements to monitor and locate avalanches and estimation of density within compacting snow deposited on glaciers and ice sheets.