Direct numerical simulation of particle-laden plane turbulent wall jet and the influence of Stokes number

Abstract The distribution and motion of inertial particles in plane turbulent wall jet are investigated using direct numerical simulation, under the assumption of one-way coupling. To our knowledge, this appears to be the first direct numerical simulation of a particle-laden plane turbulent wall jet. It is shown that, in outer part of the wall jet, the behaviour of particles closely resembles that of a free plane jet. Due to the streamwise decay of particle Stokes number, the particle streaks formed in the near wall region of the wall jet are characterized by their intensity variation, which differs significantly from those in the channel flow. The streamwise growth of the particle velocity half-width is approximately equal to that of the fluid velocity half-width and the maximum velocity of particles decays slower than that of fluid due to inertia. The outer scaling can collapse the mean particle velocity in both the inner and outer region for heavier particles. In the buffer region, the particle–fluid velocity difference can be negative or positive depending on the Stokes number since there are two competing effects, namely the memory effect and turbophoresis. In the viscous region, the larger particles are on average faster than fluid and the velocity difference is found to be self-similar depending on outer Stokes number. The near-wall distribution of velocity difference is significantly correlated with the presence of high-momentum particles which are entrained by vortical structures generated in the outer region of the wall jet. These results are useful for environmental and engineering applications.