Hidden Vehicles Positioning via Asynchronous V2V Transmission: A Multi-Path-Geometry Approach.

Accurate vehicular sensing is a basic and important operation in autonomous driving. Unfortunately, the existing techniques have their own limitations. For instance, the GPS-based approach (e.g., transmission of GPS information) has high latency and low reliability while the reflection-based approach (e.g., RADAR) is incapable of detecting hidden vehicles (HVs) without line-of-sight. This is arguably the reason behind some recent fatal accidents involving autonomous vehicles. To address this issue, this paper presents a novel HV-sensing technology that exploits multi-path transmission from a HV to a sensing vehicle (SV). The powerful technology enables the SV to detect multiple HV-state parameters including position, orientation of driving direction, and size. Its implementation does not even require transmitter-receiver synchronization like the conventional microwave positioning techniques. Our design approach leverages estimated information on multi-path (namely their AoA, AoD, and ToA) and their geometric relations. As a result, a complex system of equations or optimization problems, where the desired HV-state parameters are variables, can be formulated for different channel-noise conditions. The development of intelligent solution methods ranging from least-square estimator to disk/box minimization yields a set of practical HV-sensing techniques. We study their feasibility conditions in terms of the required number of paths. Furthermore, practical solutions, including sequential path combining and random directional beamforming, are proposed to enable HV-sensing given insufficient paths. Last, realistic simulation of driving in both highway and rural scenarios demonstrates the effectiveness of the proposed techniques. In summary, the proposed technique will enhance the capabilities of existing vehicular sensing technologies (e.g., RADAR and LIDAR) by enabling HV sensing.