Research on filtering characteristics of asymmetric photonic crystal fiber based on gold coating

Abstract In this paper, an asymmetric photonic crystal fiber (PCF) polarization filter near the gold-clad hole based on surface plasmon resonance (SPR) is proposed. The outer walls of the two air holes in the y-direction are coated with a gold film, and the two kinds of cladding air holes are introduced near the coated holes to increase the difference in the coupling strength of x and y polarization modes and SPP modes, thus separating the two polarization states. The finite element method is used to study the characteristics of the polarization filter, and the result shows that the polarization loss in the y-direction is as high as 1565.98 dB/cm at 1 . 55 μ m , while the loss in the x-direction is relatively small. When the fiber length is 1 mm, the crosstalk peak reaches 1322.7 dB. From 1 μ m to 2 μ m (range: 1000 nm), the crosstalk is always greater than 20 dB. If four kinds of pores with different sizes are used in the cladding layer, the symmetry around the gold-coated holes will be destroyed, and a better filtering effect can be obtained. The excellent performance of the proposed polarization filter makes it a good candidate material for broadband polarization filters.