Texture and Magnetic Properties of Rolled Fe-6.5 wt.%Si Thin Sheets
2014
Thin (0.20 mm) Fe-6.5 wt.%Si sheets have been successfully fabricated by the continuous rolling method. The designed rolling process parameters, including the initial hot-band grain size, grain size after intermediate annealing, cold rolling reduction, and cold rolling temperature, were selected to control the texture development. Dominant recrystallization η fiber [rolling direction (RD)//\( \left\langle {001} \right\rangle \)] was achieved after high-temperature annealing. The produced Fe-6.5 wt.%Si thin sheets are promising alternatives for use in power electronics because of their magnetic properties from 400 Hz to 40 kHz.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
21
References
10
Citations
NaN
KQI