Selective diffusive gradients in thin-films with molecularly imprinted polymer for measuring fluoroquinolone antibiotics in waters.

Fluoroquinolones (FQs) have raised significant concerns due to their ubiquitous occurrence and promoting of antimicrobial resistance (AMR). In this study, a molecularly imprinted polymer-diffusive gradient in thin-films (MIP-DGT) sampler is developed for selective measurement of FQs in waters by using a commercial available MIP material as the binding agent. The MIP-DGT shows selective adsorption of the FQs and linearly accumulates the FQs over the deployment time. MIP-DGT measurement is independent of pH (6-8) and ionic strength (IS) (0.01-0.5 M) but is affected by DOM at higher concentrations (~10 mg•L-1), which is due to the altered diffusion coefficients and reduced adsorption on the MIP binding gel. Significant interaction effects of DOM with pH or IS indicate that this is the predominant influence on the MIP-DGT performance, which results in a lower measurement by the MIP-DGT but this is curtailed to some extend with increasing IS or pH. The MIP-DGT measurements, however, correlate well with those by grab sampling in a wastewater treatment plant, suggesting it is reliable for measuring FQs in waters. For the first time, we demonstrate that key water chemistry parameters do have interaction effects on the DGT measurements, which should be considered for the data interpretation. The MIP-DGT is a promising tool to understand the interaction effects of the environmental parameters on the fate, behaviours and bioavailability/toxicity of organic contaminants and improve environmental risk assessments in the environment and modelling.