Low-noise metamorphic HEMTs with reflowed 0.1-/spl mu/m T-gate
2004
A 0.1-/spl mu/m T-gate fabricated using e-beam lithography and thermally reflow process was developed and applied to the manufacture of the low-noise metamorphic high electron-mobility transistors (MHEMTs). The T-gate developed using the thermally reflowed e-beam resist technique had a gate length of 0.1 /spl mu/m and compatible with the MHEMT fabrication process. The MHEMT manufactured demonstrates a cutoff frequency f/sub T/ of 154 GHz and a maximum frequency f/sub max/ of 300 GHz. The noise figure for the 160 /spl mu/m gate-width device is less than 1 dB and the associated gain is up to 14 dB at 18 GHz. This is the first report of a 0.1 /spl mu/m MHEMT device manufactured using the reflowed e-beam resist process for T-gate formation.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
13
References
38
Citations
NaN
KQI