Predictive End-Effector Control of Manipulators on Moving Platforms Under Disturbance

This article proposes a predictive end-effector control method for manipulators operating on mobile platforms subjected to unwanted base motion. Time series is used to forecast the base motion using historical state information. Then, a trajectory specified in the inertial frame is transformed to a predicted trajectory with respect to the manipulator. By tracking this transformed trajectory, the manipulator negates the base motion. A model-predictive control problem is formulated via quadratic programming (QP) to track said trajectory over the prediction horizon. Only the first control action in the control sequence is constrained by kinematic feasibility. In this manner, QP can be swiftly solved with linear inequality constraints. It is shown that the actual joint trajectory executed by the manipulator is always kinematically feasible. Moreover, tracking error can still be reduced despite future predicted control actions being infeasible. The method is validated through both simulation and experiment. The proposed method can reduce pose error by over 60% compared to a proportional–integral feedback controller.