Control system for the new RIKEN 28-GHz superconducting electron cyclotron resonance ion source for SRILAC

A new RIKEN 28-GHz superconducting electron cyclotron resonance ion source (SC-ECRIS) has been installed for the superconducting RIKEN linear accelerator (SRILAC). The new SC-ECRIS control system mainly consists of programmable logic controllers (PLCs) embedded with the Experimental Physics and Industrial Control System. To improve the reliability as compared with previous control systems, two types of PLC central processing units, sequential and Linux, have been installed in the same unit. Past experience has shown that new types of designs that can rapidly respond to system scalability are key. By connecting PLC stations using star-topology field buses, their rapid and cost-effective response to system changes is realized for the new devices. Furthermore, a unique data acquisition system employing a 920-MHz-band radio was developed to measure analog data such as the temperature at the high-voltage stage.A new RIKEN 28-GHz superconducting electron cyclotron resonance ion source (SC-ECRIS) has been installed for the superconducting RIKEN linear accelerator (SRILAC). The new SC-ECRIS control system mainly consists of programmable logic controllers (PLCs) embedded with the Experimental Physics and Industrial Control System. To improve the reliability as compared with previous control systems, two types of PLC central processing units, sequential and Linux, have been installed in the same unit. Past experience has shown that new types of designs that can rapidly respond to system scalability are key. By connecting PLC stations using star-topology field buses, their rapid and cost-effective response to system changes is realized for the new devices. Furthermore, a unique data acquisition system employing a 920-MHz-band radio was developed to measure analog data such as the temperature at the high-voltage stage.