Two new cascaded multilevel inverters with less number of components by using series submultilevel inverters

In this paper, two new cascaded inverters are proposed, by using the series connection of new Sub-multilevel inverters. Each of the proposed Sub-multilevel inverters consists of three batteries and eight power switches. Four algorithms are presented to determine the voltages of these batteries for each of the proposed structures. In this study the comparison between the proposed structures with conventional structures has been done. At first, the proposed algorithms of new structures are compared with each other and after that comparisons between proposed structures based on selected algorithms and the traditional structures are performed. This comparison shows that the proposed inverters can produce high number of output voltage levels due to determined number of power electronic switches. Also blocked voltage of the proposed structures is smaller than other compared structures which leads to reduce size and weight of the proposed inverters. Other advantages of these structures are reduction of voltage sources number, DC sources variety, the conduction losses and the number of power diodes. In order to demonstrate the correct operation of the proposed structures and applied algorithms, simulation results by using PSCAD/EMTDC software are shown.