Influence of Machine Hammer Peening on the Tribological Behavior and the Residual Stresses of Wear Resistant Thermally Sprayed Coatings

Abstract WC-W 2 C iron based cermet coatings are widely used in the field of wear protection. In surface engineering, machine hammer peening (MHP) is a novel surface treatment technology, which enhances the surface properties, especially for surfaces in tribological contact. In this study, the wear behavior of peened WC-W 2 C FeCrCMnSi arc sprayed coatings is characterized and compared to conventional coatings under as-sprayed conditions. The resulting strain hardening effects were measured by mechanical response using nanoindentation. In addition, residual stresses at the surfaces were determined using X-ray diffraction and the sin 2 ψ method.