Fundamental mode emission in tapered quantum cascade lasers for high brightness

Currently, the highest power quantum cascade lasers (QCLs) include (i) an efficient active region design, which minimizes the energy fraction transferred into heat, (ii) a relatively large number (40) of cascades, which increases the mode confinement factor, Γ, and (iii) narrow buried-heterostructure waveguides, which efficiently cool the active region through efficient lateral heat flow. This combination allows watt-level continuous wave (cw) emission powers at room temperature. Moreover, narrow waveguides favor the fundamental TM00 lateral mode, resulting in a nearly Gaussian beam. To the extent that power efficiency is already largely optimized, power scaling in narrow-stripe QCLs is only possible through increasing the laser length, which is limited by the needs for robust construction and transparent antireflection coatings. Broad-area (BA) QCLs with a small number of cascades can also deliver watt-level cw powers at room temperature, profiting from the enhanced vertical heat flow. Power can be scaled for these lasers also via the laser width and is nearly unlimited. The usual drawback of the BA lasers is poor beam quality. We discuss the use of tapered QCLs and the first demonstration of room temperature cw operation of the BA QCL in fundamental TM00 mode. A stable and reproducible transverse optical mode is achieved using a double-taper waveguide geometry. The laser emits at 4.6  μm and has a demonstrated room temperature cw power of 100 mW.