Simulation study of carbon nanotube field emission display with under-gate and planar-gate structures

Recently, two new CNTs-based triode structures, i.e., under-gate and planar-gate structures, for field emission display were proposed and exhibited good characteristics. In this paper, we will investigate how the current density distributed on anode plate and how the display’s resolution affected by the bias conditions of the emitter and the gate electrode via computer simulation. Our simulation results exhibit that the gate voltage has a strong effect on display’s resolution. For the planar triode structure, the good resolution is achieved when the gate voltage is adjusted to converge the electron beams on an anode plate. For the under-gate structure, the display has a good resolution provided that the gate voltage is not too large to pull the electrons striking on other pixels. In general, the under-gate structure has a wider gate-biased operating condition, but the planar triode structure has a higher light efficiency under the same resolution. Due to the lack of field effect in the y-direction, the sp...