Vacuum pumping requirement considerations for future fusion devices

Abstract The vacuum pumping requirements for a fusion device are dictated by a number of factors, including the materials used in construction of the device, the cleaning and conditioning techniques implemented, the operating conditions and device temperature, the plasma characteristics, and the fuel gases and impurities retained and released by the plasma-facing components (PFCs). In an attempt to derive guidelines for determining the vacuum pumping requirements of a generic fusion device, a study was undertaken to examine the vacuum pumping capabilities of existing large fusion devices, to review the cleaning and conditioning techniques now in use, and to catalog pertinent vacuum equipment that is now available or anticipated soon. In a survey of six large fusion devices [ASDEX, DIII-D, the Joint European Torus (JET), JT-60, the Tokamak Fusion Test Reactor (TFTR), Tore Supra], information was collected on PFC materials, cleaning and conditioning techniques, device operating temperatures, and vacuum pumping system characteristics and on the surface conditions and partial pressures necessary to achieve high-purity plasma discharges in each device. The results of the survey are reviewed to determine how the various factors affect vacuum pumping requirements. The use of tritium in future fusion devices is expected to create a new set of problems for the vacuum pumping systems of these devices. These problems are addressed, and some possible solutions for the pumping and gas handling systems are identified. New vacuum equipment is under development, and the fusion community is in a position to influence its direction and emphasis. Information gained in studies of this type should be brought to bear on the development process to ensure that vacuum equipment will be available to meet the needs of future fusion devices.