The preparation of copper fine particle paste and its application as the inner electrode material of a multilayered ceramic capacitor.

Well size-controlled copper fine particles (diameter: 100?300?nm) were used as the inner electrode material of multilayered ceramic capacitors (MLCCs). The particles were dispersed in terpineol to form a printing paste with 50?wt% copper particles. The MLCC precursor modules prepared by the layer-by-layer printing of copper and BaTiO3 particles were cosintered. Detailed observation of the particles, paste, and MLCCs before and after sintering was carried out by electron microscopy. The sintering temperature of Cu-MLCC was as low as 960??C. The permittivity of these MLCCs was successfully measured with the copper inner layers.