Design and performance analysis of low power LNA with variable gain current reuse technique

This paper presents a CMOS low power Variable Gain Low Noise Amplifier for 26–34 GHz in 45 nm process technology, which composes of cascaded complimentary common gate (CCG) stage and digital current steering amplifier. First stage is CCG stage, which helps in achieving the low power consumption and less area. Second stage is variable gain amplifier, uses current reuse technique as well as gm-boost technique and has constant dc current to make the input impedance stable. Source degeneration technique cancel out MOS parasitic capacitance help in achieving linearity. Simulated maximum peak gain is 13.139 dB at 30.57 GHz and lowest peak gain is 7.75 dB at 26 GHz i.e. approximately flat over the entire band. Lowest NF is 3.08 dB at 32.6 GHz. Process corner simulation has been done for all four corners (S–S, S–F, F–S, F–F) showing robustness of LNA. Input return loss has value less than − 9.58 dB while output return loss has less than − 2.6 dB showing good matching; power consumption is 16 mW for dc current of 16 mA at 1 V. MOS active chip area is 76.727 µm2.