Characterization of ZAO® sintered getter material for use in fusion applications

Abstract The use of non-evaporable getter (NEG) pumps is common in many UHV applications, and the properties of the new sintered getters based on the ZAO ® alloy make them appealing for applications dealing with large fluxes of hydrogen and its isotopes, as typically occurs in fusion research. In particular, the use of NEG pumps is interesting for the vacuum system of negative ion-based neutral beam injectors, which require huge deuterium gas throughputs for long durations. The key advantages of a NEG pumping solution are the high specific pumping speed and capacity, the ability to withstand a large number of absorption/desorption cycles, the ease of integration. In addition, NEG do not release hydrogen unless power is supplied to heat them, addressing an important safety issue related to uncontrolled release in case of power outage or subsystem failures. This paper reports the experimental characterization of ZAO ® sintered getters, in pressure regimes and sorption amounts relevant for the use in the next generation NBI. Single discs and complete pumps were characterized in different conditions of H 2 /D 2 pressure between 10 −4 and 10 -1 Pa and operating temperatures up to 150°C. In particular, the feasibility of getter regeneration within time windows compatible with current NBI operation scenarios was demonstrated.